Fluke 88V Automotive Multimeter

Fluke 88V Automotive Multimeter The Fluke 88V has improved trouble-shooting features, accuracy, and measurement functions to solve more problems on hybrid and conventional vehicles. The Fluke 88V Digital Multimeter is known as one of the most powerful automative multimeters ever created by Fluke. In addition to including all of the standard multimeter functions like the ability to measure continuity, current, resistance, and voltage, the Fluke 88-5 can perform pulse width measurements and diode test. This meter can take current measurements up 10A continuously and 20A for 30 seconds. The magnetic hanger allows you to attach the multimeter to nearly any steel surface for easy viewing and set-up. The Fluke 88V was made to be used in high energy environments like those found on hybrid automobiles. The Fluke Series 88V Measures: Continuity, resistance, and diode test. 4 ½ digits for accurate measurements. Measure up to 1000 V DC and AC. RPM measurements with optional inductive pickup. Millisecond pulse width measurements for fuel injectors. Frequency to 200 kHz and % duty cycle. Temperature measurements with optional temperature probe. Measure current up to 20 A for up to 30 seconds, 10 A continuously. Other Features: 0.1 % dc accuracy Limited lifetime warranty. Current measurements up to 20 A for up to 30 seconds, 10 A continuously. Magnetic hanger allows meter to attach to the vehicle. Autohold™ to capture stable readings with only one touch of the leads. Large display digits and two-level bright white backlight for increased visibility. Auto and manual ranging for maximum flexibility. 10 meg ohm input impedance won’ t damage computer circuits. Input Alert provides audible warning against wrong use of input jacks. Access door for fast battery changes without opening up the case. Peak Min/ Max to record transients as fast as 250 ¼ s. Min/ Max/ Average recording with Min/ Max Alert to capture variations automatically. Relative mode to remove test lead resistance from low ohms measurements. Analog bargraph to track rapidly changing or unstable signals. “ Classic” design with new removable holster, built-in probe storage and test lead. Technical Specifications DCV Maximum Voltage: 1000V Accuracy: Fluke 88 V: ± ( 0.1% + 1) Best Resolution: Fluke 88 V: 0.01 mV ACV Maximum Voltage: 1000V Accuracy: Fluke 88 V: ± ( 0.5% + 2) AC Bandwidth: Fluke 88 V: 5kHz Best Resolution: 0.01 mV DC Current Maximum Amps: 10A Amps Accuracy: Fluke 88 V: ± ( 0.4% + 2) Best Resolution: Fluke 88 V: 0.001 mA AC Current Maximum Amps: 10A Amps Accuracy: Fluke 88 V: ± ( 1.2% + 2) Best Resolution: 0.001 mA Resistance Maximum Resistance: 50 M© Accuracy: Fluke 88 V: ± ( 0.4% + 1) Best Resolution: 0.1© Capacitance Maximum Capacitance: 9, 999 µ F Accuracy: ± ( 1% + 2) Best Resolution: 0.01 nF Frequency Maximum Frequency: 200 KHz Accuracy: ± ( 0.005% + 1) Best Resolution: 0.01 Hz Duty Cycle Maximum Duty Cycle: 99.9 % Accuracy: within 2% per KHz + 0.1% Best Resolution: 0.1 % Temperature Measurement -200.0° C - 1090° C -328.0° F - 1994.0° F, 1.0% excluding probe 80 BK Temperature Probe -40 ° C - 260 ° C -40 ° F - 500 ° F, 2.2 ° C or 2% whichever is greater Conductance Maximum Conductance: 60.00 nS Accuracy: ± ( 1.0% + 10) Maximum Resolution: 0.01 nS Operating Range Operating Temperature: -20 ° C - 55 ° C Storage Temperature: -40 ° C - 60 ° C Physical 5.2 cm x 9.8cm x 20.1 cm ( 2.06” x 3.86” x 7.93” ) 624 g ( 22 oz.)